Home › Engine / Hybrid System › 1GD-FTV (STARTING) › STARTER (for 2.7 kW Type)
RM27T0E _51 Engine / Hybrid System _053695 1GD-FTV STARTING _0260743 STARTER(for 2.7 kW Type) A

1GD-FTV STARTING  STARTER(for 2.7 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28120 1.REMOVE STARTER YOKE ASSEMBLY

a.
A115884E07
1.688,1.552 1.177,1.781 1.177,1.781 1.094,1.781 false 0.917,1.698 1.156,1.906 0.24,0.208 10 false *a

Remove the nut and disconnect the lead wire from terminal C.

Text in Illustration
*a Terminal C


b.

Remove the 2 bolts.


c.

Pull out the starter yoke assembly together with the starter armature assembly.


d.

Remove the felt washer from the starter armature assembly.


Hide 28150 2.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A102626

Remove the 3 screws and magnet starter switch assembly.


Hide 28011 3.REMOVE STARTER CLUTCH SUB-ASSEMBLY

a.
A306552E02
0.51,0.375 0.344,0.375 0.344,0.375 0.344,1.24 false 1.354,0.167 1.188,0.167 1.188,0.167 1.188,0.792 false 2.896,0.156 2.74,0.156 2.74,0.156 2.74,0.396 false 0.854,1.833 0.688,1.833 false 1.5,2.031 1.333,2.031 1.333,2.031 1.333,1.833 false 2.135,1.969 1.969,1.969 1.969,1.969 1.833,1.771 false 0.552,0.313 0.792,0.469 0.24,0.156 10 false *1 1.385,0.094 1.625,0.25 0.24,0.156 10 false *2 2.927,0.083 3.167,0.24 0.24,0.156 10 false *3 0.49,1.75 0.729,1.906 0.24,0.156 10 false *4 1.531,1.938 1.771,2.094 0.24,0.156 10 false *5 2.167,1.865 2.406,2.021 0.24,0.156 10 false *6

Remove the return spring, idle gear, clutch roller, retainer and starter clutch sub-assembly from the starter drive housing assembly.

Text in Illustration
*1 Return Spring
*2 Starter Clutch Sub-assembly
*3 Starter Drive Housing Assembly
*4 Clutch Roller
*5 Retainer
*6 Idle Gear


b.
A115020E09
2.354,0.174 2.575,0.364 0.221,0.191 10 *a 2.162,0.758 2.162,0.24 2.162,0.24 2.327,0.24 false

Using a magnet hand, remove the steel ball from the clutch shaft hole.

Text in Illustration
*a Magnet Hand


Hide 28140 4.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A360243

Remove the 2 screws and commutator end frame from the starter yoke assembly.


b.
A102629

Disconnect the 4 starter brushes from the starter brush holder assembly.

i.

Using a screwdriver, pull back the brush spring.


ii.

Disconnect the brush from the starter brush holder assembly.



c.

Remove the starter brush holder assembly from the starter yoke assembly.


Hide 28160 5.REMOVE STARTER ARMATURE ASSEMBLY

a.

Remove the starter armature assembly from the starter yoke assembly.