Home › Engine / Hybrid System › 1GD-FTV (STARTING) › RELAY › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053695 1GD-FTV STARTING _0260746 RELAY G

1GD-FTV STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY (ST)

a.
A092673E93
0.26,1.271 0.385,1.583 0.125,0.313 10 true 1 1.292,1.292 1.531,1.563 0.24,0.271 10 true 2 0.208,0.771 0.385,0.958 0.177,0.188 10 true 3 1.292,0.792 1.448,0.99 0.156,0.198 10 true 5 1.427,1.031 1.604,1.219 0.177,0.188 10 true 3 2.719,0.344 2.948,0.573 0.229,0.229 10 true 1 1.958,1.74 2.198,2.01 0.24,0.271 10 true 2 3.135,1.031 3.292,1.271 0.156,0.24 10 true 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.


Hide 28610 2.INSPECT GLOW RELAY (GLOW)

a.
A092673E94
0.198,1.313 0.396,1.531 0.198,0.219 10 true 1 0.229,0.771 0.406,0.958 0.177,0.188 10 true 5 1.271,0.781 1.469,0.979 0.198,0.198 10 true 3 1.281,1.323 1.438,1.521 0.156,0.198 10 true 2 1.427,1.031 1.604,1.229 0.177,0.198 10 true 3 2.698,0.344 2.896,0.563 0.198,0.219 10 true 1 3.146,1.031 3.323,1.219 0.177,0.188 10 true 5 1.979,1.75 2.135,1.948 0.156,0.198 10 true 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow relay.