Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260747 CRUISE CONTROL SYSTEM D

CRUISE CONTROL  CRUISE CONTROL SYSTEM  ROAD TEST  


INSPECT SET SWITCH


a.
E123589

Turn the cruise control main switch on.


b.

Check that the CRUISE main indicator light in the combination meter assembly illuminates.


c.

Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).


d.
E123591

Push the cruise control main switch to -SET.


e.

Check that the SET indicator light in the combination meter assembly illuminates.


f.

After releasing the switch, check that the vehicle cruises at the desired speed.



INSPECT "+" SWITCH


a.
E123589

Turn the cruise control main switch on.


b.

Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).


c.
E123591

Push the cruise control main switch to -SET.


d.
E123590

Check that the vehicle speed increases while the cruise control main switch is pushed to +RES, and that the vehicle cruises at the set speed when the cruise control main switch is released.


e.

Momentarily push the cruise control main switch upward to +RES and immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (tap-up function).



INSPECT "-" SWITCH


a.
E123589

Turn the cruise control main switch on.


b.

Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).


c.
E123591

Push the cruise control main switch to -SET.


d.

Check that the vehicle speed decreases while the cruise control main switch is pushed down to -SET, and that the vehicle cruises at the set speed when the cruise control main switch is released.


e.

Momentarily push the cruise control main switch downward to -SET and immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (tap-down function).



INSPECT CANCEL FUNCTION (CANCEL SWITCH)


a.
E123589

Turn the cruise control main switch on.


b.

Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).


c.
E123591

Push the cruise control main switch to -SET.


d.

When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.

·

Depressing the brake pedal

·

Pushing the cruise control main switch off

·

Pulling the cruise control main switch to CANCEL

·

Driving the vehicle while the vehicle stability control system is operating

·

for Automatic Transmission:

Moving the shift lever from D to N, or selecting 3rd, 2nd or 1st range with the shift lever in S

·

for Manual Transmission:

Depressing the clutch pedal




INSPECT RES (RESUME) SWITCH


a.
E123589

Turn the cruise control main switch on.


b.

Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).


c.
E123591

Push the cruise control main switch to -SET.


d.

Cancel the cruise control system by performing one of the following.

·

Depressing the brake pedal

·
E123592

Pulling the cruise control main switch to CANCEL

·

Driving the vehicle while the vehicle stability control system is operating

·

for Automatic Transmission:

Moving the shift lever from D to N, or selecting 3rd, 2nd or 1st range with the shift lever in S

·

for Manual Transmission:

Depressing the clutch pedal



e.
E123590

After the cruise control main switch is pushed up to +RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed that was set before the cancellation.