This DTC indicates the presence of internal abnormalities in the ECM.
| DTC Code | DTC Detection | Condition Trouble Area |
|---|---|---|
| P0575 | Either condition is met:
·
The cruise control input signal is abnormal. ·
The stop light switch input signal is abnormal. |
ECM |
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.
Clear the DTCs (See page Engine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Engine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR).
DTC P0575 is not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for 1GR-FE) | B |
| NG (for 2TR-FE) | C |
| NG (for 1KD-FTV) | D |
| NG (for 1GD-FTV) | E |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C
D
E