Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260749 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY

a.

Measure the resistance (for vehicles without vehicle-to-vehicle distance control mode).

B215369E02
0.497,2.805 0.807,2.986 0.310,0.181 10 CCS 1.384,2.78 1.694,2.961 0.310,0.181 10 ECC 2.573,2.725 2.976,2.907 0.403,0.181 10 (CCS) 2.573,2.046 2.976,2.227 0.403,0.181 10 (ECC) 0.934,2.401 0.665,2.777 false 1.314,2.401 1.53,2.746 false 3.866,2.385 4.230,2.567 0.364,0.181 10 MAIN 4.528,2.385 4.911,2.567 0.384,0.181 10 +RES 5.289,2.385 5.622,2.567 0.333,0.181 10 -SET 6,2.385 6.581,2.567 0.580,0.181 10 CANCEL

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (ECC) - 3 (CCS) Neutral 10 kΩ or higher
1 (ECC) - 3 (CCS) +RES 235 to 245 Ω
1 (ECC) - 3 (CCS) -SET 617 to 643 Ω
1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω
1 (ECC) - 3 (CCS) Main switch off 10 kΩ or higher
1 (ECC) - 3 (CCS) Main switch on Below 2.5 Ω


If the result is not as specified, replace the cruise control main switch assembly.




b.

Measure the resistance (for vehicles with vehicle-to-vehicle distance control mode).

B215368E10
0.948,2.438 0.469,2.646 true 1.333,2.427 1.74,2.604 true 1.156,2.458 1.156,2.802 true 0.313,2.667 0.625,2.844 0.313,0.177 10 false CCS 1.635,2.646 1.948,2.823 0.313,0.177 10 false ECC 2.385,2.667 2.792,2.844 0.406,0.177 10 false (CCS) 2.406,2.021 2.76,2.198 0.354,0.177 10 false (R/N) 6.458,2.135 6.865,2.313 0.406,0.177 10 false (ECC) 3.635,2.313 4,2.49 0.365,0.177 10 false MAIN 4.302,2.313 4.688,2.49 0.385,0.177 10 false +RES 5.063,2.313 5.396,2.49 0.333,0.177 10 false -SET 5.771,2.313 6.354,2.49 0.583,0.177 10 false CANCEL 1.042,2.823 1.302,3 0.26,0.177 10 false R/N 2.99,2.135 3.427,2.313 0.438,0.177 10 false MODE

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (ECC) - 2 (R/N)
1 (ECC) - 3 (CCS)
Neutral 10 kΩ or higher
1 (ECC) - 3 (CCS) +RES 235 to 245 Ω
1 (ECC) - 3 (CCS) -SET 617 to 643 Ω
1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω
1 (ECC) - 3 (CCS) Main switch off 10 kΩ or higher
1 (ECC) - 3 (CCS) Main switch on Below 2.5 Ω
3 (CCS) - 2 (R/N) Main switch on and mode switch on Below 2.5 Ω


If the result is not as specified, replace the cruise control main switch assembly.