1.DRAIN BRAKE FLUID FROM CLUTCH LINE
31464
2.REMOVE CLUTCH MASTER CYLINDER HEAT INSULATOR (for 1GD-FTV)
Remove the 2 nuts and clutch master cylinder heat insulator.
31481
3.DISCONNECT FLEXIBLE HOSE TUBE
Using a union nut wrench, disconnect the flexible hose tube.
Use a container to catch the fluid.
31410
4.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
Remove the clip and pin.
except 1GD-FTV:
Remove the 2 nuts and clutch master cylinder.
Remove the gasket.
for 1GD-FTV:
Remove the 2 nuts and clutch master cylinder.
Remove the gasket and clutch master cylinder bracket.