31477
1.INSTALL RELEASE CYLINDER BLEEDER PLUG
Install the bleeder plug to the cylinder body.
04313
2.INSTALL CLUTCH RELEASE CYLINDER KIT
Install 2 new cylinder cups to a new piston.
Install a new spring to the piston.
Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.
| *1 | Lithium soap base glycol grease |
Install the piston (with the spring) to the cylinder body.
Do not damage the inside of the cylinder body.
Install the push rod to a new boot.
Install the boot (with the push rod) to the cylinder body.