1.DRAIN BRAKE FLUID FROM CLUTCH LINE
37140
2.REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for 1GR-FE)
Remove the front propeller shaft (See page Drivetrain>DRIVE SHAFT / PROPELLER SHAFT>FRONT PROPELLER SHAFT ASSEMBLY>REMOVAL).
31121
3.REMOVE NO. 1 CLUTCH HOUSING COVER (for 1GR-FE)
31490
4.REMOVE CLUTCH ACCUMULATOR ASSEMBLY
for 1GR-FE:
Remove the clutch release cylinder to accumulator tube (See page Drivetrain>CLUTCH>CLUTCH RELEASE CYLINDER (for 1GR-FE)>REMOVAL).
Using a union nut wrench, disconnect the clutch release cylinder to flexible tube.
Use a container to catch the fluid.
Remove the nut.
Remove the 3 bolts and clutch accumulator.
except 1GR-FE and 1GD-FTV:
Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.
Use a container to catch the fluid.
Using a union nut wrench, disconnect the accumulator to flexible hose tube.
Use a container to catch the fluid.
Remove the 3 nuts and clutch accumulator.
for 1GD-FTV:
Using a union nut wrench, disconnect the clutch master cylinder to accumulator.
Using a union nut wrench, remove the accumulator to flexible hose tube.
Use a container to catch the fluid.
Remove the clip and disconnect the flexible hose tube.
Use a container to catch the fluid.
Remove the 3 nuts and clutch accumulator.