Home › Drivetrain › G52F (MANUAL TRANSMISSION / TRANSAXLE) › COUNTER GEAR
RM27T0E _52 Drivetrain _053700 G52F MANUAL TRANSMISSION / TRANSAXLE _0260816 COUNTER GEAR G

G52F MANUAL TRANSMISSION / TRANSAXLE  COUNTER GEAR  INSPECTION  


PROCEDURE

Hide 33421 1.INSPECT COUNTER GEAR

a.
C086509

Using a micrometer, measure the outside diameter of the journal surface.

Standard outside diameter:

25.984 to 26.000 mm (1.0230 to 1.0236 in.)


Minimum outside diameter:

25.984 mm (1.0230 in.)


If the outside diameter is less than the minimum, replace the counter gear.



Hide 33411A 2.INSPECT COUNTER GEAR FRONT BEARING

a.
C086510

Check that the front bearing rotates smoothly.

If the bearing does not rotate smoothly, replace the bearing.