Home › Drivetrain › RA61F (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSMISSION UNIT (for 1KD-FTV) › 2015.06–2020.08
RM27T0E _52 Drivetrain _053701 RA61F MANUAL TRANSMISSION / TRANSAXLE _0260825 MANUAL TRANSMISSION UNIT(for 1KD-FTV) A

RA61F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION UNIT(for 1KD-FTV)  REASSEMBLY  


PROCEDURE

Hide 33229A 1.INSTALL NO. 1 RELEASE ARM

a.

Install the No. 1 release arm and shift arm pivot to the shift interlock bracket.


b.

Install a new E-ring to the shift arm pivot.


Hide 33245G 2.INSTALL NO. 4 GEAR SHIFT FORK SHAFT

a.
D033723

Install the compression spring and shift detent ball to the shift interlock bracket.


b.

Install the No. 4 gear shift fork shaft.


Hide 33215B 3.INSTALL NO. 4 GEAR SHIFT FORK

C136398

a.

Install the No. 4 gear shift fork to the No. 4 gear shift fork shaft.


b.

Using a 5 mm pin punch and hammer, tap a new slotted spring pin into the No. 4 gear shift fork and No. 4 gear shift fork shaft.

Standard depth:

0 to 0.5 mm (0 to 0.0196 in.)



Hide 33212A 4.INSTALL NO. 1 GEAR SHIFT FORK

C136399

a.

Install the No. 1 gear shift fork and No. 2 gear shift head to the No. 4 gear shift fork shaft.


b.

Using a 5 mm pin punch and hammer, tap a new slotted spring pin into the No. 2 gear shift head and No. 4 gear shift fork shaft.

Standard depth:

0 to 0.5 mm (0 to 0.0196 in.)



Hide 33242 5.INSTALL NO. 1 GEAR SHIFT FORK SHAFT

C232593

a.

Install the compression spring and shift detent ball to the shift interlock bracket.


b.

Install the No. 1 gear shift fork shaft to the shift interlock bracket.


Hide 33232F 6.INSTALL NO. 1 GEAR SHIFT HEAD

C136400

a.

Install the No. 1 gear shift head to the No. 1 gear shift fork shaft.


b.

Using a 5 mm pin punch and hammer, tap a new slotted spring pin into the No. 1 gear shift head and No. 1 gear shift fork shaft.

Standard depth:

0 to 0.5 mm (0 to 0.0196 in.)



Hide 33243A 7.INSTALL NO. 2 GEAR SHIFT FORK SHAFT

C232592

a.

Install the compression spring and shift detent ball to the shift interlock bracket.


b.

Install the No. 2 gear shift fork shaft to the shift interlock bracket.


Hide 33213G 8.INSTALL NO. 2 GEAR SHIFT FORK

C388675

a.

Install the No. 2 gear shift fork with a new bolt.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


Hide 33244D 9.INSTALL NO. 3 GEAR SHIFT FORK SHAFT

C232591

a.

Install the compression spring and shift detent ball to the shift interlock bracket.


b.

Install the No. 3 gear shift fork shaft to the shift interlock bracket.


Hide 33214G 10.INSTALL NO. 3 GEAR SHIFT FORK

F051588

a.

Install the No. 3 gear shift fork with a new bolt.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


Hide 33112H 11.INSTALL TRANSMISSION CASE NEEDLE BEARING

a.
C335533E02
1.75,1.177 1.99,0.885 1.99,0.885 2.688,0.885 false 1.99,1.188 2.219,0.885 false 1.625,0.063 1.771,0.219 0.146,0.156 10 false A 1.573,3.604 1.76,3.771 0.188,0.167 10 false *a 2.74,0.802 3.083,0.969 0.344,0.167 10 false SST

Using SST, install the transmission case needle bearing into the front transmission case so that dimension A in the illustration is as specified.

SST
09950-60010  (09951-00220)
09950-70010  (09951-07100)

Dimension A:

0.50 to 1.50 mm (0.0197 to 0.0590 in.)


Text in Illustration
*a Front


Hide 33111Q 12.INSTALL TRANSMISSION CASE OIL SEAL

D033643E06
0.708,0.958 0.396,0.542 true 0.031,0.448 0.323,0.625 0.292,0.177 10 false SST 1.688,0.813 1.802,0.958 0.115,0.146 10 false A

a.

Using SST and a hammer, tap a new transmission case oil seal into the front transmission case so that dimension A in the illustration is as specified.

SST
09950-70010  (09951-07100)
09950-60010  (09951-00470)

Dimension A:

60.0 to 60.8 mm (2.363 to 2.393 in.)



b.

Apply gear oil to the lip of the transmission case oil seal.


Hide 33311G 13.INSTALL FRONT BEARING SHAFT SNAP RING

D033639

a.

Using snap ring pliers, install the 2 front bearing shaft snap rings.


Hide 33124L 14.INSTALL NO. 3 OIL RECEIVER PIPE

D033642

a.

Install the No. 3 oil receiver pipe to the front transmission case.

HINT:

Align the protrusion of the No. 3 oil receiver pipe with the cutout of the front transmission case and install the No. 3 oil receiver pipe to the front transmission case.



Hide 33111 15.INSTALL FRONT TRANSMISSION CASE

D033644

a.

Apply gear oil to all sliding and rotating parts.


b.

Temporarily install the output shaft assembly, input shaft assembly, counter gear assembly shift interlock bracket, gear shift forks, gear shift fork shafts, and tie them with a piece of rope or string.


c.
D033637

Using a snap ring expander, expand the 2 snap rings and install the output shaft assembly, input shaft assembly, counter gear assembly shift interlock bracket, gear shift forks, gear shift fork shafts.

HINT:

Make sure that the snap ring fits into the grooves of the input shaft and front bearing of the counter gear shaft.



d.

Untie the output shaft assembly, input shaft assembly, counter gear assembly shift interlock bracket, gear shift forks, gear shift fork shafts.


e.
F051583

Using a 27 mm hexagon wrench, install a new manual transmission case plug to the front transmission case.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)


f.
D033635

Install the shift interlock bracket with the 4 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 33461 16.INSTALL REVERSE IDLER GEAR

C116297E03
0.26,3.667 0.417,3.813 0.156,0.146 10 false *a

a.

Install the reverse idler gear, reverse idler gear bearing and reverse idler gear shaft.

Text in Illustration
*a 15°

HINT:

Make sure that the reverse idler gear faces the correct direction as shown in the illustration.


NOTICE:

Make sure that the hole in the reverse idler gear shaft is in the position shown in the illustration.



Hide 84210 17.INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

F051581E04
1.698,1.76 1.698,1.51 false 1.563,1.781 1.854,1.958 0.292,0.177 10 false SST

a.

Using SST, install a new gasket and the back-up light switch assembly to the front transmission case.

SST
09817-16011  

Torque:
44 N*m (449 kgf*cm, 32 ft.*lbf)


Hide 33251 18.INSTALL SHIFT AND SELECT LEVER

a.

Install the compression spring and lock ball pin to the shift and select lever.


b.

Install the shift and select lever, shift and select cam and shift interlock plate to the shift and select lever shaft.


c.
C215764

Using a 5 mm pin punch and hammer, tap in a new slotted pin to the shift and select lever shaft.

Standard depth:

1.0 to 2.0 mm (0.0394 to 0.0787 in.)



d.

Install a new bolt to the shift and select lever.

Torque:
47 N*m (479 kgf*cm, 35 ft.*lbf)


e.

Install a new E-ring to the lever shaft.


Hide 33261C 19.INSTALL SHIFT AND SELECT LEVER SHAFT

C217412

a.

Align the groove of the shift and select cam with the reverse idler shaft and the claw with the groove of the control assembly, and then install the shift and select lever shaft.


Hide 33124D 20.INSTALL NO. 2 OIL RECEIVER PIPE

a.

Install the No. 2 oil receiver pipe to the transmission middle case.


Hide 33104 21.INSTALL DRAIN PLUG SUB-ASSEMBLY

a.

Install a new gasket and the drain plug sub-assembly to the transmission middle case.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 33101 22.INSTALL TRANSMISSION MIDDLE CASE

D033756E12
2.323,0.479 2.75,0.479 false 2.813,0.396 2.969,0.542 0.156,0.146 10 false *1

a.

Apply seal packing to the transmission middle case as shown in the illustration.

Seal Packing:

Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent


Text in Illustration
*a Seal Packing

NOTICE:

Parts must be assembled within 10 minutes of application. Otherwise, the seal packing (FIPG material) must be removed and reapplied.



b.
U170194E02
1.063,0.354 1.188,0.531 0.125,0.177 10 false A 2.042,1.958 2.156,2.094 0.115,0.135 10 false A 1.208,1.958 1.323,2.094 0.115,0.135 10 false A 0.875,1.771 0.99,1.906 0.115,0.135 10 false A 2.219,0.375 2.333,0.51 0.115,0.135 10 false A 1.615,0.219 1.729,0.354 0.115,0.135 10 false A 2.313,1.75 2.448,1.938 0.135,0.188 10 false B 2.49,1.333 2.646,1.5 0.156,0.167 10 false B 2.448,0.833 2.563,1 0.115,0.167 10 false B 0.76,1.385 0.917,1.573 0.156,0.188 10 false B 0.771,0.854 0.906,1.042 0.135,0.188 10 false B

Install the transmission middle case with the 11 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)

Bolt length:

for bolt A: 40 mm (1.57 in.)

for bolt B: 80 mm (3.15 in.)



Hide 33451H 23.INSTALL REVERSE IDLER GEAR SHAFT BOLT

D033649

a.

Install a new gasket and the reverse idler gear shaft bolt to the reverse idler gear shaft.

Torque:
28 N*m (286 kgf*cm, 21 ft.*lbf)


Hide 33176B 24.INSTALL TRANSMISSION OIL SEPARATOR

F051575

a.

Install the transmission oil separator with the 2 bolts.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 36117Q 25.INSTALL TRANSFER ADAPTER NEEDLE ROLLER BEARING

a.
C215735E02
1.552,0.948 1.552,0.177 true 1.552,0.177 1.927,0.177 false 1.771,0.969 1.771,0.177 true 1.458,3.458 1.635,3.604 0.177,0.146 10 false *a 1.99,0.073 2.302,0.208 0.313,0.135 10 false SST

Using SST, install the transfer adapter needle roller bearing to the transfer adapter.

SST
09950-60010  (09951-00220)
09950-70010  (09951-07150)

Text in Illustration
*a Front


Hide 33421G 26.INSTALL COUNTER GEAR REAR RADIAL BALL BEARING

a.
C216332E02
1.583,0.833 0.771,0.833 true 1.104,2.167 1.354,2.167 false 1.354,2.167 1.354,2.51 false 0.375,0.75 0.698,0.896 0.323,0.146 10 false SST 0.688,2.083 1.01,2.229 0.323,0.146 10 false SST

Coat a new counter gear rear radial ball bearing with gear oil, and then using SST and a press, install it to the transfer adapter.

SST
09950-70010  (09951-07360)
09950-60010  (09951-00650)


b.
D033746

Install the bearing lock plate with the bolt.

Torque:
11 N*m (115 kgf*cm, 8 ft.*lbf)


Hide 33321A 27.INSTALL REAR OUTPUT SHAFT BEARING

a.
C217358E02
0.708,0.75 0.99,0.75 false 2.313,0.667 2.667,0.667 false 2.271,2.188 2.438,2.188 false 2.438,2.188 2.438,2.583 false 0.677,2.135 0.771,2.135 false 0.771,2.135 0.771,2.531 false 0.375,0.667 0.677,0.813 0.302,0.146 10 true SST 1.927,0.583 2.229,0.729 0.302,0.146 10 false SST 1.906,2.125 2.208,2.271 0.302,0.146 10 false SST 0.302,2.073 0.604,2.219 0.302,0.146 10 false SST

Using SST and a press, press in 2 new rear output shaft bearings (outer race) to the transfer adapter.

SST
09950-70010  (09951-07100, 09951-07360)
09950-60020  (09951-00790)


Hide 36117G 28.INSTALL TRANSFER ADAPTER CASE PLUG

a.
C215734

Using a 14 mm hexagon socket wrench, install a new transfer adapter case plug to the transfer adapter.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


Hide 36867B 29.INSTALL OIL SEPARATOR PACKING SEAL

D033752

a.

Install the oil separator packing seal to the transfer adapter.

HINT:

Insert the protruding part of the oil separator packing seal into the groove of the transfer adapter.



Hide 33124C 30.INSTALL NO. 1 OIL RECEIVER PIPE

a.

Install the No. 1 oil receiver pipe to the transfer adapter.


Hide 33101A 31.INSTALL MANUAL TRANSMISSION FILLER PLUG

a.

Install 2 new gaskets and the 2 manual transmission filler plugs to the transfer adapter.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 36117 32.INSTALL TRANSFER ADAPTER

D033757E11
2.25,0.438 2.688,0.281 true 2.74,0.177 2.917,0.354 0.177,0.177 10 false *a

a.

Apply seal packing to the transfer adapter as shown in the illustration.

Seal packing:

Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent


Text in Illustration
*a Seal Packing

NOTICE:

Parts must be assembled within 10 minutes of application. Otherwise, the seal packing (FIPG material) must be removed and reapplied.



b.

Install the transfer adapter and 2 brackets to the transmission middle case with the 10 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 33275F 33.INSTALL SHIFT DETENT BALL PLUG

a.

Install the ball and compression spring to the transfer adapter.


b.

Using a 10mm socket hexagon wrench, install a new shift detent ball plug to the transfer adapter.

Torque:
25 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 33321G 34.INSTALL MANUAL TRANSMISSION OUTPUT SHAFT REAR SET NUT

a.

Using a belt and wooden block, securely fasten the transmission to the workbench.


b.

Install a new output shaft spacer and a new rear output shaft bearing (inner race).


c.
C215766E02
0.823,3.917 0.823,3.792 0.823,3.792 1.208,3.177 true 1.792,3.302 2.365,3.594 false 2.365,3.594 2.365,3.813 false 2,3.177 2.469,3.177 false 0.76,3.969 0.917,4.125 0.156,0.156 10 false *1 2.292,3.854 2.448,4.01 0.156,0.156 10 false *2 2.521,3.083 2.677,3.24 0.156,0.156 10 false *3

Temporarily install a new manual transmission output shaft rear set nut by hand.

Text in Illustration
*1 Output Shaft Spacer
*2 Rear Output Shaft Bearing
*3 Manual Transmission Output Shaft Rear Set Nut

HINT:

Fit the spacer and rear output shaft bearing securely.



d.

Move the shift and select lever shaft to N.


e.

Using SST, rotate the output shaft 15 times at a speed of 100 rpm or less in order to settle the bearing.


f.
C215767E02
2.885,1.042 2.469,1.042 true 2.469,1.042 2.094,1.198 true 2.135,1.563 2.469,1.052 true 2.927,0.958 3.229,1.104 0.302,0.146 10 false SST

Using SST and a torque wrench, measure the output shaft preload.*1

SST
09326-35010  (09326-03010, 09326-03020)


g.
C199426E05
0.542,0.938 0.656,0.938 0.656,0.938 0.927,1.323 false 0.469,3.104 0.583,3.104 0.583,3.104 0.906,3.573 true 3,3.073 2.885,3.073 2.885,3.073 1.677,2.083 true 1.854,4.292 1.792,4.292 1.792,4.292 1.615,4.104 false 2.958,1.26 2.396,1.26 2.396,1.26 1.74,1.917 true 2.063,3.479 1.896,3.479 false 1.896,3.479 1.896,3.781 false 0.188,0.854 0.5,1 0.313,0.146 10 false SST 0.115,3.021 0.427,3.167 0.313,0.146 10 false SST 3.021,2.969 3.156,3.125 0.135,0.156 10 false A 1.875,4.198 2.01,4.354 0.135,0.156 10 false A 3,1.208 3.177,1.354 0.177,0.146 10 false *1 2.094,3.406 2.271,3.552 0.177,0.146 10 false *1

Engage 5th gear, and then secure the input shaft using SST.

SST
09322-35010  (09322-03010, 09322-03020, 09322-03030, 90105-12087, 90170-12030)

Text in Illustration
*1 Input Shaft

HINT:
·

Install SST securely so that (A) is in-line with the input shaft.

·

Make sure that (A) moves back and forth by hand after installing SST.




h.
C215768E02
0.917,1.365 1.406,1.365 true 0.583,1.292 0.885,1.438 0.302,0.146 10 false SST

Using SST and a torque wrench, tighten the nut.

Torque:
580 N*m (5914 kgf*cm, 428 ft.*lbf)


i.

Move the shift and select lever shaft to N.


j.

Using SST, rotate the output shaft 15 times at a speed of 100 rpm or less in order to settle the bearing.


k.
C215767E02
2.885,1.042 2.469,1.042 true 2.469,1.042 2.094,1.198 true 2.135,1.563 2.469,1.052 true 2.927,0.958 3.229,1.104 0.302,0.146 10 false SST

Using SST and a torque wrench, measure the output shaft preload.*2

SST
09326-35010  (09326-03010, 09326-03020)


l.

Adjust the preload so that the difference between *1 and *2 is within the specified range.

Standard Preload (at starting):

*2 - *1 = 0.45 to 1.05 N*m (4.59 to 10.7 kgf*cm, 3.99 to 9.29 in.*lbf)


If the preload is more than the standard, replace the output shaft spacer.



m.
C215769

Using a chisel and hammer, caulk the manual transmission output shaft rear set nut.


Hide 33121G 35.INSTALL MANUAL TRANSMISSION CASE COVER

F051645E07
2.344,0.802 2.792,0.656 true 2.823,0.563 2.99,0.719 0.167,0.156 10 false *a

a.

Apply seal packing to the manual transmission case cover as shown in the illustration.

Seal packing:

Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent


Text in Illustration
*a Seal Packing

NOTICE:

Parts must be assembled within 10 minutes of application. Otherwise, the seal packing (FIPG material) must be removed and reapplied.



b.

Install the manual transmission case cover with 4 new bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 33521 36.INSTALL SHIFT LEVER HOUSING

a.
C215731

Install the shift lever housing with a new bolt.

Torque:
47 N*m (479 kgf*cm, 35 ft.*lbf)


Hide 33506F 37.INSTALL FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY

C217251E03
2.521,1.063 3.083,1.063 true 3.146,1.01 3.333,1.156 0.188,0.146 10 false *a

a.

Apply seal packing to the floor shift control shift lever retainer sub-assembly as shown in the illustration.

Seal packing:

Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent


Text in Illustration
*a Seal Packing

NOTICE:

Parts must be assembled within 10 minutes of application. Otherwise, the seal packing (FIPG material) must be removed and reapplied.



b.

Install the floor shift control shift lever retainer sub-assembly with the 4 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 31237 38.INSTALL CLUTCH RELEASE FORK SUPPORT BOOT

a.

Install the clutch release fork support boot to the front transmission case.


Hide 31236B 39.INSTALL RELEASE FORK SUPPORT

Hide 31230 40.INSTALL CLUTCH RELEASE BEARING ASSEMBLY

Hide 31204 41.INSTALL CLUTCH RELEASE FORK SUB-ASSEMBLY

Hide 31126 42.INSTALL CLUTCH RELEASE FORK BOOT