Home › Drivetrain › VF4BM (TRANSFER / 4WD / AWD) › TRANSFER SYSTEM › 2015.06–2017.08
RM27T0E _52 Drivetrain _053703 VF4BM TRANSFER / 4WD / AWD _0260838 TRANSFER SYSTEM U

VF4BM TRANSFER / 4WD / AWD  TRANSFER SYSTEM  TERMINALS OF ECU  


CHECK 4 WHEEL DRIVE CONTROL ECU


U148192E03
2.677,0.51 2.979,0.677 0.302,0.167 10 false G53 4.708,0.5 5.01,0.667 0.302,0.167 10 false G54

a.

Measure the voltage and resistance according to the value(s) in the table below.

for 1GR-FE, 1KD-FTV, 1GD-FTV:
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G53-1 (HL1) - G54-4 (GND) GR - W-B High-low transfer shift actuator limit switch Ignition switch ON
Transfer position switch H4
10.5 to 14 V
Ignition switch ON
Transfer position switch L4
Below 1.5 V
G53-2 (HL2) - G54-4 (GND) LG - W-B High-low transfer shift actuator limit switch Ignition switch ON
Transfer position switch H4
Below 1.5 V
Ignition switch ON
Transfer position switch L4
10.5 to 14 V
G53-7 (TL2) - G54-4 (GND) V - W-B Multi mode transfer shift actuator limit switch Ignition switch ON
Center differential lock switch Lock
Below 1.5 V
Ignition switch ON
Center differential lock switch Free
10.5 to 14 V
G53-8 (TL3) - G54-4 (GND) G - W-B Multi mode transfer shift actuator limit switch Ignition switch ON
Center differential lock switch Lock
10.5 to 14 V
Ignition switch ON
Center differential lock switch Free
Below 1.5 V
G53-13 (LO) - G54-4 (GND) GR - W-B Transfer position switch Ignition switch ON
Transfer position switch H4
10.5 to 14 V
Ignition switch ON
Transfer position switch L4
Below 1.5 V
G53-14 (P1) - G54-4 (GND) W - W-B Multi mode transfer shift actuator
Center differential lock position detection switch
Ignition switch ON
Center differential lock switch Free
9.5 to 14 V
Ignition switch ON
Center differential lock switch Lock
Below 1.5 V
G53-16 (DL) - G54-4 (GND) W - W-B Center differential lock switch Ignition switch ON
Center differential lock switch ON
Below 1.5 V
Ignition switch ON
Center differential lock switch OFF
9.5 to 14 V
G53-17 (MTN)*1 - G54-4 (GND) B - W-B Clutch start switch Ignition switch ON
Clutch start switch ON
Below 1.5 V
Ignition switch ON
Clutch start switch OFF
9.5 to 14 V
G53-19 (CANH) - G54-4 (GND) G - W-B CAN communication line Ignition switch ON Pulse generation (see waveform 1)
G53-20 (CANL) - G54-4 (GND) W - W-B CAN communication line Ignition switch ON Pulse generation (see waveform 2)
G53-21 (L4) - G54-4 (GND) R - W-B Transfer L4 signal Ignition switch ON
Transfer position switch H4
10 to 14 V
Ignition switch ON
Transfer position switch L4
Below 1.5 V
G54-2 (HM1) - G54-4 (GND) B - W-B High-low transfer shift actuator motor Ignition switch ON
Transfer position switch H4 → L4 (During operation of high-low transfer shift actuator motor from HIGH to LOW)
10 to 14 V
Ignition switch ON
Transfer position switch H4 → L4 (High-low transfer shift actuator motor stopped)
Below 1.5 V
G54-3 (IG) - G54-4 (GND) R - W-B IG power Ignition switch ON 11 to 14 V
G54-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G54-6 (HM2) - G54-4 (GND) W - W-B High-low transfer shift actuator motor Ignition switch ON
Transfer position switch L4 → H4 (During operation of high-low transfer shift actuator motor from LOW to HIGH)
10 to 14 V
Ignition switch ON
Transfer position switch L4 → H4 (High-low transfer shift actuator motor stopped)
Below 1.5 V
G54-7 (TM2) - G54-4 (GND) V - W-B Multi mode transfer shift actuator motor Ignition switch ON
Center differential lock switch LOCK → FREE (During operation of multi mode transfer shift actuator motor from LOCK to FREE)
10 to 14 V
Ignition switch ON
Center differential lock switch LOCK → FREE (Multi mode transfer shift actuator motor stopped)
Below 1.5 V
G54-8 (TM1) - G54-4 (GND) P - W-B Multi mode transfer shift actuator motor Ignition switch ON
Center differential lock switch FREE → LOCK (During operation of multi mode transfer shift actuator motor from FREE to LOCK)
10 to 14 V
Ignition switch ON
Center differential lock switch FREE → LOCK (Multi mode transfer shift actuator motor stopped)
Below 1.5 V

*1: for Manual Transmission

for 2TR-FE, 5L-E:
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G53-1 (HL1) - G54-4 (GND) GR - W-B High-low transfer shift actuator limit switch Ignition switch ON
Transfer position switch H4F or H4L
10.5 to 14 V
Ignition switch ON
Transfer position switch L4L
Below 1.5 V
G53-2 (HL2) - G54-4 (GND) LG - W-B High-low transfer shift actuator limit switch Ignition switch ON
Transfer position switch H4F or H4L
Below 1.5 V
Ignition switch ON
Transfer position switch L4L
10.5 to 14 V
G53-6 (TL1) - G54-4 (GND) W-B - W-B Transfer operating switch mode selection signal Always Below 1 Ω
G53-7 (TL2) - G54-4 (GND) V - W-B Multi mode transfer shift actuator limit switch Ignition switch ON
Transfer position switch H4L or L4L
Below 1.5 V
Ignition switch ON
Transfer position switch H4F
10.5 to 14 V
G53-8 (TL3) - G54-4 (GND) G - W-B Multi mode transfer shift actuator limit switch Ignition switch ON
Transfer position switch H4L or L4L
10.5 to 14 V
Ignition switch ON
Transfer position switch H4F
Below 1.5 V
G53-11 (2-4) - G54-4 (GND) R - W-B Transfer position switch Ignition switch ON
Transfer position switch H4F or H4L
Below 1.5 V
Ignition switch ON
Transfer position switch L4L
10.5 to 14 V
G53-13 (LO) - G54-4 (GND) GR - W-B Transfer position switch Ignition switch ON
Transfer position switch H4F
10.5 to 14 V
Ignition switch ON
Transfer position switch H4L or L4L
Below 1.5 V
G53-14 (P1) - G54-4 (GND) W - W-B Multi mode transfer shift actuator
Center differential lock position detection switch
Ignition switch ON
Transfer position switch H4F
9.5 to 14 V
Ignition switch ON
Transfer position switch H4L or L4L
Below 1.5 V
G53-17 (MTN)*1 - G54-4 (GND) B - W-B Clutch start switch Ignition switch ON
Clutch start switch ON
Below 1.5 V
Ignition switch ON
Clutch start switch OFF
9.5 to 14 V
G53-19 (CANH) - G54-4 (GND) G - W-B CAN communication line Ignition switch ON Pulse generation (see waveform 1)
G53-20 (CANL) - G54-4 (GND) W - W-B CAN communication line Ignition switch ON Pulse generation (see waveform 2)
G53-21 (L4) - G54-4 (GND) R - W-B Transfer L4 signal Ignition switch ON
Transfer position switch H4F or H4L
10 to 14 V
Ignition switch ON
Transfer position switch L4L
Below 1.5 V
G54-2 (HM1) - G54-4 (GND) B - W-B High-low transfer shift actuator motor Ignition switch ON
Transfer position switch H4L → L4L (During operation of high-low transfer shift actuator motor from HIGH to LOW)
10 to 14 V
Ignition switch ON
Transfer position switch H4L → L4L (High-low transfer shift actuator motor stopped)
Below 1.5 V
G54-3 (IG) - G54-4 (GND) R - W-B IG power Ignition switch ON 11 to 14 V
G54-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G54-6 (HM2) - G54-4 (GND) W - W-B High-low transfer shift actuator motor Ignition switch ON
Transfer position switch L4L → H4L (During operation of high-low transfer shift actuator motor from LOW to HIGH)
10 to 14 V
Ignition switch ON
Transfer position switch L4L → H4L (High-low transfer shift actuator motor stopped)
Below 1.5 V
G54-7 (TM2) - G54-4 (GND) V - W-B Multi mode transfer shift actuator motor Ignition switch ON
Transfer position switch H4L → H4F (During operation of multi mode transfer shift actuator motor from LOCK to FREE)
10 to 14 V
Ignition switch ON
Transfer position switch H4L → H4F (Multi mode transfer shift actuator motor stopped)
Below 1.5 V
G54-8 (TM1) - G54-4 (GND) P - W-B Multi mode transfer shift actuator motor Ignition switch ON
Transfer position switch H4F → H4L (During operation of multi mode transfer shift actuator motor from FREE to LOCK)
10 to 14 V
Ignition switch ON
Transfer position switch H4F → H4L (Multi mode transfer shift actuator motor stopped)
Below 1.5 V

*1: for Manual Transmission


b.
C357239E01
0.083,0.104 0.396,0.302 0.313,0.198 10 false *1 3.021,1.396 3.396,1.688 0.375,0.292 10 false GND

Using an oscilloscope, check waveform 1.

Waveform 1 (Reference)
Item Content
Terminal No. (Symbol) G53-19 (CANH) - G54-4 (GND)
Tool setting 1 V/DIV., 10 μsec./DIV.
Condition Engine stopped and ignition switch ON

Text in Illustration
*1 Waveform 1

HINT:

The waveform varies depending on the CAN communication signal.



c.
C357240E01
0.083,0.083 0.396,0.281 0.313,0.198 10 false *1 3.042,1.385 3.385,1.635 0.344,0.25 10 false GND 2.781,0.219 3.354,0.469 0.573,0.25 10 false 1 V/DIV. 1.375,1.906 2.427,2.125 1.052,0.219 10 false 10 μsec./DIV.

Using an oscilloscope, check waveform 2.

Waveform 2 (Reference)
Item Content
Terminal No. (Symbol) G53-20 (CANL) - G54-4 (GND)
Tool setting 1 V/DIV., 10 μsec./DIV.
Condition Engine stopped and ignition switch ON

Text in Illustration
*1 Waveform 2

HINT:

The waveform varies depending on the CAN communication signal.