Home › Drivetrain › VF4BM (TRANSFER / 4WD / AWD) › TRANSFER OIL
RM27T0E _52 Drivetrain _053703 VF4BM TRANSFER / 4WD / AWD _0260839 TRANSFER OIL G

VF4BM TRANSFER / 4WD / AWD  TRANSFER OIL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK TRANSFER OIL

a.
C217371

Remove the filler plug and gasket.


b.
C083746E22
2.646,0.844 2.854,1.042 0.208,0.198 10 false *a

Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

If the result is not as specified, add transfer oil.

Text in Illustration
*a 0 to 5 mm

NOTICE:

Too much or too little oil will lead to transfer problems.



c.

When the oil level is too low, check for oil leaks.


d.

Install a new gasket to the filler plug and then tighten the plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.ADD TRANSFER OIL

a.

Remove the filler plug and gasket.


b.

Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

NOTICE:
·

Add oil slowly.

·

Add oil a little at a time, waiting several minutes between each addition of oil.




c.

Wait approximately 5 minutes and check that the oil level has not changed.


d.

Install a new gasket to the filler plug and then tighten the plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)