Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM27T0E _52 Drivetrain _053705 AXLE AND DIFFERENTIAL _0260858 REAR AXLE SHAFT G

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  INSPECTION  


PROCEDURE

Hide 42312 1.INSPECT REAR AXLE SHAFT

R012254

a.

Using a dial indicator, measure the rear axle shaft runout and flange runout.

Maximum runout:

Shaft runout: 1.50 mm (0.0591 in.)

Flange runout: 0.05 mm (0.00197 in.)


If the rear axle shaft or flange is damaged or worn, or the runout is more than the maximum, replace the rear axle shaft.