Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM27T0E _52 Drivetrain _053705 AXLE AND DIFFERENTIAL _0260858 REAR AXLE SHAFT A

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  DISASSEMBLY  


PROCEDURE

Hide 42312D 1.REMOVE REAR AXLE SHAFT SNAP RING LH

F042773

a.

Using a snap ring expander, remove the snap ring.


Hide 42312 2.REMOVE REAR AXLE SHAFT LH

F042774E09
1.646,0.625 1.448,0.167 false 1.885,1.552 2.74,1.49 false 1.094,0.073 1.396,0.229 0.302,0.156 10 false SST 2.771,1.406 3.073,1.563 0.302,0.156 10 false SST

a.

Using SST and a press, press out the rear axle shaft.

SST
09521-25023  
09521-25011  


b.
F042797

Grind the rear axle bearing inner retainer using a grinder, and then remove it with a chisel.


c.

Remove the shaft washer from the axle shaft.


Hide 42450B 3.REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH

F042776

a.

Temporarily install 4 nuts to the housing bolts.

NOTICE:

Do not use any nuts removed from the vehicle, as they may be damaged.



b.

Using a hammer, remove the 4 housing bolts and rear axle hub and bearing.


c.

Remove the 4 nuts.


Hide 42441B 4.REMOVE BRAKE DRUM OIL DEFLECTOR LH

F042775E09
0.708,0.51 0.469,0.969 false 0.281,1.01 0.646,1.198 0.365,0.188 10 false SST

a.

Using SST, remove the 6 hub bolts.

SST
09650-17011  

NOTICE:
·

Do not deform the oil deflector.

·

Make sure to align the notch of SST with the flange of the oil deflector.




b.

Remove the deflector and deflector gasket from the rear axle shaft.