Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY (w/ Differential Lock)
RM27T0E _52 Drivetrain _053705 AXLE AND DIFFERENTIAL _0260866 REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock) G

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock)  INSPECTION  


PROCEDURE

Hide 41453 1.INSPECT REAR DIFFERENTIAL LOCK SLEEVE

G020273

a.

Install the sleeve to the differential case (LH) and check that it moves smoothly.


b.

Install the side gear to the sleeve and check that it moves smoothly.


c.
G020274

Using a feeler gauge, measure the clearance between the shift fork and sleeve.

Maximum clearance:

0.15 to 0.35 mm (0.00591 to 0.0138 in.)



Hide 2.INSPECT DIFFERENTIAL PINION AND SIDE GEAR

a.

Check that there is no damage to the differential pinion or differential side gear.

If the differential pinion and/or differential side gear is damaged, replace the differential.


Hide 3.INSPECT DIFFERENTIAL CASE

a.

Check that the differential case is not damaged.

If the differential case is damaged, replace it.