Home › Suspension › FRONT SUSPENSION › FRONT UPPER SUSPENSION ARM
RM27T0E _53 Suspension _053708 FRONT SUSPENSION _0260890 FRONT UPPER SUSPENSION ARM A

FRONT SUSPENSION  FRONT UPPER SUSPENSION ARM  DISASSEMBLY  


PROCEDURE

Hide 48632B 1.REMOVE FRONT SUSPENSION UPPER ARM BUSH LH

HINT:

Use the same procedure for the front and rear sides.


a.
G020154

Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.


b.
G020155E06
1.198,0.927 1.375,0.75 false 1.271,1.396 1.385,1.635 1.385,1.635 1.125,1.604 false 1.417,0.604 1.708,0.781 0.292,0.177 10 false SST 1.448,1.563 1.74,1.74 0.292,0.177 10 false SST

Using SST and a press, press out the bush.

SST
09613-26010  
09710-22021  (09710-01031)
09950-00020  


Hide 43324C 2.REMOVE FRONT UPPER BALL JOINT DUST COVER LH

a.
C214806

Using a snap ring expander, remove the dust cover set ring and dust cover from the upper arm.

NOTICE:
·

Do not damage the ball joint dust cover.

·

If the ball joint dust cover is damaged, replace it.