Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM
RM27T0E _53 Suspension _053708 FRONT SUSPENSION _0260893 FRONT LOWER SUSPENSION ARM A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM  DISASSEMBLY  


PROCEDURE

Hide 48654F 1.REMOVE FRONT NO. 1 LOWER ARM BUSH LH

a.
G020164

Using a chisel and hammer, pry the flange of the bush outward.


b.
G020412E05
1.188,1.552 1.396,1.833 false 1.396,1.833 1.542,1.833 false 1.521,0.271 1.385,0.271 false 1.385,0.271 1.146,0.51 false 1.385,0.271 1.135,0.771 false 1.552,0.198 1.865,0.354 0.313,0.156 10 false SST 1.573,1.76 1.896,1.927 0.323,0.167 10 false SST

Using SST and a press, press out the bush.

SST
09632-36010  
09950-00020  
09950-60010  (09951-00400)


Hide 48655E 2.REMOVE FRONT NO. 2 LOWER ARM BUSH LH

a.
G020164

Using a chisel and hammer, pry the flange of the bush outward.


b.
G020413E06
1.479,0.125 1.323,0.125 false 1.323,0.125 1.156,0.385 false 1.323,0.125 1.125,0.677 false 1.573,1.771 1.385,1.771 false 1.385,1.771 1.25,1.521 false 1.51,0.042 1.844,0.198 0.333,0.156 10 false SST 1.594,1.698 1.927,1.865 0.333,0.167 10 false SST

Using SST and a press, press out the bush.

SST
09632-36010  
09950-00020  
09950-60010  (09951-00400)


Hide 43345E 3.REMOVE LOWER BALL JOINT DUST COVER LH

a.
C214807

Using a snap ring expander, remove the dust cover set ring and dust cover from the lower arm.

NOTICE:
·

Do not damage the ball joint dust cover.

·

If the ball joint dust cover is damaged, replace it.