43345E
1.INSTALL LOWER BALL JOINT DUST COVER LH
Pack the upper arm ball joint with MP grease.
8.0 g (0.282 oz.)
Apply MP grease to the locations shown in the illustration.
| *1 | MP Grease |
Do not apply MP grease to the tapered or threaded parts of the ball joint.
Install the dust cover to the lower arm.
Using a snap ring expander, install the dust cover set ring.
Make sure the set ring is securely installed in the groove.
48655E
2.INSTALL FRONT NO. 2 LOWER ARM BUSH LH
Using SST and a press, press in a new bush.
| *a | Bush Positioning Protrusion |
Press in the bush while making sure the bush positioning protrusions are perpendicular to the lower arm as shown in the illustration.
48654F
3.INSTALL FRONT NO. 1 LOWER ARM BUSH LH
Using SST and a press, press in a new bush.