Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM27T0E _53 Suspension _053709 REAR SUSPENSION _0260895 REAR SHOCK ABSORBER A

REAR SUSPENSION  REAR SHOCK ABSORBER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 48540 2.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH (w/ Air Suspension)

a.

Support the rear axle housing.


b.

Disconnect the absorber control actuator connector.


c.
D028132

Remove the bolt and disconnect the rear shock absorber assembly LH from the rear axle housing.

NOTICE:

Do not lower the rear axle housing excessively when disconnecting the rear shock absorber assembly LH with the pneumatic cylinder still installed to the vehicle.



d.
C214690

Remove the nut, cushion No. 1 and rear shock absorber assembly LH.


e.

Remove the cushion No. 2 from the shock absorber assembly rear LH.


Hide 48540 3.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH (w/o Air Suspension)

a.

Support the rear axle housing.


b.
D028132

Remove the bolt and disconnect the rear shock absorber assembly LH from the rear axle housing.


c.
D028133

Remove the nut, cushion No. 1 and rear shock absorber assembly LH.


d.

Remove the cushion No. 2 from the shock absorber assembly rear LH.