48812
1.INSTALL REAR STABILIZER BAR
Install the 2 stabilizer bushes to the stabilizer bar.
Install the stabilizer bush to the outer side of the stabilizer bush stopper on the stabilizer bar.
|
Outer Side |
Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.
48840A
2.INSTALL REAR STABILIZER LINK ASSEMBLY LH
Install the stabilizer link with a new nut.
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.
Install the 2 retainers and cushion to the stabilizer link.
Hold the stabilizer bar link with a wrench, and then install the retainer, cushion and link with a new nut.
48830D
3.INSTALL REAR STABILIZER LINK ASSEMBLY RH
Use the same procedure described for the LH side.
4.INSTALL REAR WHEEL