Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR(w/o KDSS)
RM27T0E _53 Suspension _053709 REAR SUSPENSION _0260897 REAR STABILIZER BAR(w/o KDSS) G

REAR SUSPENSION  REAR STABILIZER BAR(w/o KDSS)  INSPECTION  


PROCEDURE

Hide 48830 1.INSPECT REAR STABILIZER LINK ASSEMBLY

a.
D028478

As shown in the illustration, flip the ball joint stud back and forth 5 times.


b.

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take a torque reading on the 5th turn.

Standard turning torque:

0.05 to 1.96 N*m (0.51 to 20 kgf*cm, 0.44 to 17.3 in.*lbf)