Home › Suspension › REAR SUSPENSION › REAR PNEUMATIC CYLINDER(w/ Air Suspension)
RM27T0E _53 Suspension _053709 REAR SUSPENSION _0260899 REAR PNEUMATIC CYLINDER(w/ Air Suspension) A

REAR SUSPENSION  REAR PNEUMATIC CYLINDER(w/ Air Suspension)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48090B 1.REMOVE REAR PNEUMATIC CYLINDER ASSEMBLY LH

a.

Jack up the vehicle and support the frame with safety stands.

NOTICE:
·

Perform this procedure with the rear axle assembly lowered.

·

Perform this procedure with the shock absorber installed.





c.
C214803

Remove the clip on the top of the pneumatic cylinder.

HINT:

If the clip cannot be removed easily, pass a wire through the hole and pull it.



d.
C214771E01
2.427,0.087 2.606,0.276 0.179,0.188 10 *a 1.899,0.626 2.174,0.173 false 2.174,0.173 2.398,0.173 false

Place matchmarks on the nut and rear pneumatic cylinder.

Text in Illustration
*a Matchmark


e.

Remove the nut.


f.

Discharge air from the pneumatic cylinder assembly to cause it to retract.


g.

Remove the rear pneumatic cylinder from the rear axle housing.