If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU. The skid control ECU stores this DTC and prohibits the following controls:
VSC
TRC
Downhill assist control
Crawl control
Multi-terrain select control
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1201 | A malfunction signal is received from the ECM. | Engine control system |
Check the engine type.
| Result | Proceed to |
|---|---|
| 1GR-FE | A |
| 1KD-FTV | B |
| 1GD-FTV | C |
A
B
C
Check if an engine control system DTC is output (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
B
Check if an engine control system DTC is output (See page Engine / Hybrid System>1KD-FTV (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
B
Check if an engine control system DTC is output (for 1GD-FTV (w/ Urea SCR System): See page Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>DTC CHECK / CLEAR, for 1GD-FTV: See page Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output (for 1GD-FTV (w/ Urea SCR System)) | B |
| DTC is output (for 1GD-FTV) | C |
A
B
C