Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster)
RM27T0E _54 Brake _053712 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0260912 VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster)  C1201  Engine Control System Malfunction  


DESCRIPTION

If a malfunction in the engine control system is detected, VSC and TRC operations are prohibited by the fail-safe function. When the signals from the engine are input normally, fail-safe is canceled and the DTC is cleared.

DTC Code DTC Detection Condition Trouble Area
C1201 An engine control system malfunction signal continues for 1 second or more. Engine control system

PROCEDURE

1.CHECK ENGINE CONTROL SYSTEM
a.

Check if any engine control system DTC is output (See page Engine / Hybrid System>2TR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC not output A
DTC output B



A

B

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)