Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER
RM27T0E _54 Brake _053713 BRAKE SYSTEM (OTHER) _0260932 BRAKE BOOSTER G

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 44610 1.INSPECT BRAKE BOOSTER ASSEMBLY

a.

Airtightness check

i.
C132722E04
0.543,0.156 0.769,0.326 0.225,0.170 10 *a 2.228,0.147 2.453,0.317 0.225,0.170 10 *b 0.5,1.737 0.733,1.900 0.232,0.163 10 1st 0.801,1.651 1.075,1.813 0.274,0.162 10 2nd 1.11,1.531 1.357,1.687 0.246,0.156 10 3rd

Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.

If the pedal can be depressed to the floor the first time, but on the 2nd and 3rd times cannot be depressed as far, the booster is airtight.

Text in Illustration
*a CORRECT
*b INCORRECT


ii.

Depress the brake pedal while the engine is running and stop the engine with the brake pedal depressed.

If there is no change in the pedal reserve distance while holding the pedal for 30 seconds, the booster is airtight.



b.

Operation check

i.
C128542

Depress the brake pedal several times with the ignition switch off and check that there is no change in the pedal reserve distance when the pedal is depressed.


ii.
C128543

Depress and hold down the pedal and start the engine.

If the pedal goes down slightly, operation is normal.