Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 5L-E)
RM27T0E _54 Brake _053713 BRAKE SYSTEM (OTHER) _0260933 VACUUM PUMP(for 5L-E) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 5L-E)  DISASSEMBLY  


PROCEDURE

Hide 29366 1.REMOVE VACUUM PUMP PULLEY

a.
C214623

Using soft jaws, place the vacuum pump in a vise, and then remove the pulley lock nut and pulley.


Hide 44730K 2.REMOVE VACUUM PUMP VACUUM HOSE UNION

a.
C214624E01
0.832,0.127 1.134,0.287 0.302,0.159 10 SST 1.752,0.368 1.541,0.213 1.541,0.213 1.189,0.213 false

Using SST, hold the check valve assembly, and then remove the union bolt, vacuum hose union and 2 gaskets.

SST
09922-10010  


Hide 44730 3.REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY

a.
C214625

Remove the check valve assembly and gasket.


Hide 4.REMOVE VACUUM PUMP END COVER

a.
C214626

Remove the 4 screws and end cover.


Hide 29336 5.REMOVE VACUUM PUMP SHAFT

a.
C214627

Using a plastic-faced hammer, tap out the vacuum pump shaft together with the bearing.


Hide 29314 6.REMOVE STOP RING

a.

Remove the stop ring from the vacuum pump shaft.


Hide 29322B 7.REMOVE VACUUM PUMP BEARING

a.
C214628

Using a press, press out the bearing from the rotor shaft.


Hide 29331 8.REMOVE VACUUM PUMP BLADE

a.
C214629

Remove the 2 screws and end plate.


b.
C354140

Remove the rotor and 5 pump blades.


Hide 9.REMOVE O-RING

a.

Remove the O-ring from the case.


Hide 29341A 10.REMOVE OIL SEAL

a.
C214630

Using a screwdriver, remove the oil seal.