Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 5L-E)
RM27T0E _54 Brake _053713 BRAKE SYSTEM (OTHER) _0260933 VACUUM PUMP(for 5L-E) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 5L-E)  REASSEMBLY  


PROCEDURE

Hide 29341A 1.INSTALL OIL SEAL

a.
U170037E02
2.5,1.458 2.5,0.844 false 2.969,0.75 3.26,0.917 0.292,0.167 10 false SST

Using SST and a hammer, tap in the oil seal.

SST
09950-60010  (09951-00400)
09950-70010  (09951-07150)


Hide 2.INSTALL O-RING

a.

Apply engine oil on a new O-ring and install the O-ring to the vacuum pump case.


Hide 29322B 3.INSTALL VACUUM PUMP BEARING

a.
C214632

Using a press, press in a new bearing to the pump shaft.


Hide 29336 4.INSTALL VACUUM PUMP SHAFT

a.

Install the vacuum pump shaft and stop ring to the vacuum pump case.


Hide 29331 5.INSTALL VACUUM PUMP BLADE

a.

Apply engine oil to the rotor and 5 new vacuum pump blades.


b.

Install the rotor and pump blades with the round end facing outward.


c.

Install the end plate with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 17 in.*lbf)


Hide 6.INSTALL VACUUM PUMP END COVER

a.

Install the end cover with the 4 screws.

Torque:
4.6 N*m (47 kgf*cm, 41 in.*lbf)


Hide 44730 7.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY

a.

Using soft jaws, place the vacuum pump in a vise. Then install a new gasket and the check valve.

Torque:
74 N*m (755 kgf*cm, 54 ft.*lbf)


Hide 44730K 8.INSTALL VACUUM PUMP VACUUM HOSE UNION

a.

Using SST, hold the check valve and install 2 new gaskets and the vacuum hose union with the union bolt.

SST
09922-10010  

Torque:
14 N*m (140 kgf*cm, 10 ft.*lbf)


Hide 29366 9.INSTALL VACUUM PUMP PULLEY

a.

Install the vacuum pump pulley with the pulley lock nut.

Torque:
105 N*m (1075 kgf*cm, 78 ft.*lbf)