Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 1KD-FTV) › 2015.06–2020.08
RM27T0E _54 Brake _053713 BRAKE SYSTEM (OTHER) _0260934 VACUUM PUMP(for 1KD-FTV) G

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 1KD-FTV)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 29300 1.CHECK VACUUM PUMP ASSEMBLY

C111341E05
2.583,0.406 2.99,0.406 2.99,0.406 2.99,0.729 false 3,1.854 3,1.938 3,1.938 2.042,1.938 false 2.896,0.76 3.073,0.927 0.177,0.167 10 false *1 1.833,1.854 2.01,2.042 0.177,0.188 10 false *2

a.

Disconnect the vacuum hose from the vacuum pump.


b.

Connect the hose of a vacuum gauge to the pump.

Text in Illustration
*1 Vacuum Gauge
*2 Plug


c.

Insert a plug into the other hose of the gauge.


d.

Start the engine and warm it up for more than 2 minutes.


e.

With the engine idling, measure the negative pressure of the pump.

Standard negative pressure:

More than 86.7 kPa (650 mmHg, 26 in.Hg)


HINT:

the vacuum pump assembly is listed as on of the 200000 km (124000 mile) maintenance parts. Make sure to disassemble and inspect it every 200000 km (124000 miles) and replace parts as necessary.



f.

Remove the gauge from the pump.


g.

Connect the hose to the pump with the clip.