Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM27T0E _54 Brake _053714 BRAKE (FRONT) _0260937 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off the brake fluid immediately if it comes into contact with a painted surface.


Hide 04465 3.REMOVE FRONT DISC BRAKE PAD

a.
C215909E09
2.281,1.333 2.688,1.771 2.688,1.771 2.833,1.771 true 0.813,0.323 0.365,0.323 true 1.646,1.448 1.458,0.969 1.458,0.969 1.365,0.969 true 0.156,0.229 0.354,0.396 0.198,0.167 10 true *1 2.875,1.688 3.063,1.875 0.188,0.188 10 false *2 1.188,0.885 1.375,1.063 0.188,0.177 10 true *3

Remove the pin hold clip.

Text in Illustration
*1 Hole Pin
*2 Pin Hold Clip
*3 Anti-rattle Spring

NOTICE:

The pin hold clip can be reused if it has sufficient rebound; no deformation or wear; and has had all rust, dirt and foreign matter cleaned off.



b.

Remove the 2 hole pins.


c.
C170925

Remove the front disc brake anti-rattle spring.

NOTICE:

The anti-rattle spring can be reused if it has sufficient rebound; no deformation, cracks or wear; and has had all rust, dirt and foreign matter cleaned off.



d.
C170926

Remove the 2 front disc brake pads from the disc brake cylinder.


e.

Remove the front No. 1 anti-squeal shims from each pad.


Hide 47750 4.REMOVE DISC BRAKE CYLINDER ASSEMBLY LH

a.
F043120

Using a union nut wrench, disconnect the brake tube from the disc brake cylinder assembly.

HINT:

Use a container to catch brake fluid as it drains out.



b.
F043121

Remove the 2 bolts and disc brake cylinder assembly.


Hide 43512 5.REMOVE FRONT DISC

a.
C215913E04
1.656,1.021 2.563,1.021 true 1.583,0.938 2.396,0.938 2.396,0.938 2.396,1.01 true 2.604,0.938 2.813,1.125 0.208,0.188 10 false *1

Place matchmarks on the disc and axle hub if planning to reuse the disc.

Text in Illustration
*1 Matchmark


b.

Remove the front disc.