Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 5L-E)
RM27T0E _55 Steering _053717 POWER ASSIST SYSTEMS _0260947 VANE PUMP(for 5L-E) A

POWER ASSIST SYSTEMS  VANE PUMP(for 5L-E)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE SUCTION PORT UNION

a.
C121998

Remove the bolt and power steering suction port union.


b.

Using a screwdriver, remove the O-ring from the power steering suction port union.


Hide 2.REMOVE FLOW CONTROL VALVE

a.
C106278

Remove the pressure port union.


b.

Remove the O-ring from the pressure port union.


c.

Remove the flow control valve and compression spring.


Hide 3.REMOVE VANE PUMP REAR HOUSING

a.
C106279

Remove the 4 bolts and vane pump rear housing.


b.

Remove the gasket.


c.

Remove the 2 O-rings from the vane pump rear housing.


Hide 4.REMOVE VANE PUMP REAR SIDE PLATE

a.

Remove the wave washer from the vane pump rear side plate.


b.
C106287

Remove the vane pump rear side plate.


Hide 5.REMOVE VANE PUMP CAM RING

a.
C106286

Remove the vane pump cam ring.


Hide 6.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane pump plates.


b.
C106281

Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.


c.

Remove the vane pump rotor.


Hide 7.REMOVE VANE PUMP SHAFT

a.

Remove the vane pump shaft from the vane pump front housing.


Hide 8.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C106280E02
0.602,0.072 0.971,0.252 0.369,0.180 10 *1 0.797,0.153 0.9,0.153 0.9,0.153 1.074,0.573 false

Using a screwdriver, pry out the vane pump housing oil seal.

Text in Illustration
*1 Cloth

NOTICE:

Be careful not to damage the vane pump front housing.