Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP (for 2TR-FE)
RM27T0E _55 Steering _053717 POWER ASSIST SYSTEMS _0260948 VANE PUMP(for 2TR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 2TR-FE)  DISASSEMBLY  


PROCEDURE

Hide 44305 1.REMOVE VANE PUMP OIL RESERVOIR CAP SUB-ASSEMBLY

a.

Remove the vane pump oil reservoir cap


Hide 44306 2.REMOVE VANE PUMP OIL RESERVOIR SUB-ASSEMBLY

a.

the 3 bolts and oil reservoir from the front vane pump housing.


b.

Using a screwdriver, remove the O-ring from the oil reservoir.


Hide 44310 3.SECURE VANE PUMP ASSEMBLY

a.
C215475E01
2.177,1.633 2.467,1.287 2.467,1.287 2.593,1.287 false 2.638,1.207 2.955,1.580 0.317,0.373 10 SST

Using SST, secure the vane pump between aluminum plates in a vise as shown in the illustration.

SST
09630-00014  (09631-00132)


Hide 44308A 4.REMOVE PRESSURE PORT UNION O-RING (w/o VSC)

a.
C084485

Using a 27 mm socket wrench, remove the pressure port union from the front housing.


b.

Using a screwdriver, remove the O-ring from the pressure port union.


c.

Remove the flow control valve from the front housing.

NOTICE:

Be careful not to damage the pressure port union.



d.

Remove the compression spring from the front housing.


Hide 89438A 5.REMOVE POWER STEERING OIL PRESSURE SWITCH (w/o VSC)

a.

Using a 19 mm deep socket wrench, remove the oil pressure switch from the front housing.


b.

Remove the O-ring from the oil pressure switch.


Hide 6.REMOVE VANE PUMP REAR HOUSING

a.
C084483

Remove the 4 bolts and rear housing from the vane pump front housing.


b.

Remove the O-ring from the vane pump rear housing.


Hide 7.REMOVE SHAFT WITH PULLEY

a.
C057767

Using 2 screwdrivers, remove the shaft snap ring from the shaft with pulley.


b.

Remove the shaft with pulley from the vane pump rear housing.


Hide 8.REMOVE VANE PUMP ROTOR

a.

Remove the vane pump rotor and 10 vane pump plates from the vane pump front housing.

NOTICE:

Be careful not to drop the vane pump plates.



Hide 9.REMOVE VANE PUMP CAM RING

Hide 10.REMOVE FRONT VANE PUMP SIDE PLATE

a.

Remove the front side plate from the vane pump front housing.


b.
C359219

Remove the No. 1 O-ring from the side plate.


c.
C065369

Remove the No. 2 O-ring from the vane pump front housing.


Hide 11.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C358678E02
1.927,0.677 2.042,0.229 2.042,0.229 2.188,0.229 true 2.25,0.156 2.51,0.323 0.26,0.167 10 false *1

Using a screwdriver and piece of cloth, pry out the oil seal.

Text in Illustration
*1 Cloth

NOTICE:

Be careful not to damage the vane pump front housing.