Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP (for 1KD-FTV) › 2015.06–2020.08
RM27T0E _55 Steering _053717 POWER ASSIST SYSTEMS _0260949 VANE PUMP(for 1KD-FTV) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1KD-FTV)  DISASSEMBLY  


PROCEDURE

Hide 44310 1.SECURE VANE PUMP ASSEMBLY

a.
C215469E01
2.287,1.358 2.790,1.594 0.503,0.236 10 SST 1.921,1.594 2.106,1.448 2.106,1.448 2.244,1.448 false

Using SST, secure the vane pump assembly in a vise.

SST
09630-00014  (09631-00132)


Hide 2.REMOVE SUCTION PORT UNION

a.
C358551

Remove the bolt and suction port union.


b.

Remove the O-ring from the suction port union.


Hide 3.REMOVE VANE PUMP REAR HOUSING

a.
G021499

Remove the 4 bolts and vane pump rear housing.


b.

Remove the O-ring from the vane pump rear housing.


Hide 4.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane pump plates.


b.

Remove the vane pump rotor.


Hide 5.REMOVE VANE PUMP CAM RING

a.

Remove the vane pump cam ring from the vane pump front housing.


Hide 6.REMOVE FRONT VANE PUMP SIDE PLATE

a.

Remove the front vane pump side plate from the vane pump front housing.


b.
C101969

Remove the O-ring from the front vane pump side plate.


c.
C101970

Remove the O-ring from the vane pump front housing.


Hide 7.REMOVE VANE PUMP GEAR

a.
C219405

Using a screwdriver, remove the snap ring from the vane pump front housing.


b.
C102430E02
2.372,0.228 2.653,0.541 0.281,0.313 10 *2 1.043,0.044 1.440,0.237 0.397,0.193 10 *1 1.255,0.136 1.404,0.136 1.404,0.136 1.607,0.359 false 2.326,0.319 2.183,0.319 2.183,0.319 1.771,0.801 false

Wrap the serration of the vane pump shaft with protective tape.

Text in Illustration
*1 Press
*2 Protective Tape


c.

Using a press, remove the vane pump shaft from the vane pump front housing.

NOTICE:

Do not drop the vane pump shaft.



d.
C219480E01
0.044,0.511 0.347,0.702 0.304,0.191 10 SST 1.507,0.287 1.812,0.472 0.305,0.186 10 *2 0.487,0.047 0.886,0.228 0.399,0.181 10 *1 0.685,0.145 0.794,0.145 0.794,0.145 0.931,0.438 false 1.476,0.379 1.395,0.379 1.395,0.379 1.108,0.924 false 0.398,0.603 0.484,0.603 0.484,0.603 0.671,0.907 false

Place the socket wrench (12 mm) on the vane pump shaft.

Text in Illustration
*1 Press
*2 Socket Wrench (12 mm)


e.

Using SST and a press, remove the vane pump gear from the vane pump shaft.

SST
09950-00020  


Hide 8.REMOVE VANE PUMP SHAFT BEARING

a.
C219481E01
0.215,0.546 0.519,0.736 0.304,0.191 10 SST 1.384,0.331 1.783,0.512 0.399,0.181 10 *1 1.39,0.414 1.309,0.414 1.309,0.414 1.106,0.786 false 0.57,0.637 0.708,0.637 0.708,0.637 0.843,0.924 false

Using SST and a press, remove the vane pump shaft bearing from the vane pump shaft.

SST
09950-00020  

Text in Illustration
*1 Press


b.
C101975

Using a snap ring expander, remove the snap ring from the vane pump shaft.


Hide 9.REMOVE VANE PUMP HOUSING OIL SEAL

a.
U169874E02
1.01,0.875 0.521,1.635 true 0.927,1.354 0.813,1.625 0.813,1.625 0.365,1.635 true 0.198,0.51 0.521,0.677 0.323,0.167 10 false *a 2.302,0.156 2.615,0.302 0.313,0.146 10 false *b 0.083,1.542 0.385,1.698 0.302,0.156 10 true SST

Using SST, remove the vane pump housing oil seal from the vane pump front housing.

SST
09319-60020  
09527-10011  

Text in Illustration
*a Hold
*b Turn