Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) › 2015.06–2017.08
RM27T0E _55 Steering _053718 STEERING COLUMN _0260958 STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) A

STEERING COLUMN  STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column)  REASSEMBLY  


PROCEDURE

Hide 89227 1.INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

a.

Install the ECU with the bolt.

Torque:
2.8 N*m (28 kgf*cm, 24 in.*lbf)


b.

Connect the connector.

NOTICE:

The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.



Hide 45020A 2.INSTALL STEERING LOCK ACTUATOR ASSEMBLY

HINT:

When replacing the steering lock actuator assembly, refer to the Service Bulletin.


a.

Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.


b.
C215866

Tighten the 2 tapered-head bolt until the bolt heads breaks off.