Home › Steering › STEERING COLUMN › HEATED STEERING WHEEL SYSTEM
RM27T0E _55 Steering _053718 STEERING COLUMN _0260963 HEATED STEERING WHEEL SYSTEM D

STEERING COLUMN  HEATED STEERING WHEEL SYSTEM  SYSTEM DESCRIPTION  


HEATED STEERING WHEEL SYSTEM


a.

The heated steering wheel system heats the steering wheel when the steering heater switch is operated.


b.

The heated steering wheel system uses a thermistor inside of the steering wheel to detect the heater temperature and maintain the set temperature.


c.

The timer function of the heated steering wheel system turns off the heater after a predetermined period of time.



HEATER CONTROLLER SYSTEM


a.

Operation description

C147022E11
0.573,0.469 1.406,0.719 0.833,0.25 10 false OFF mode 0.708,0.74 1.583,0.99 0.875,0.25 10 false - Heater off 0.708,1.021 1.573,1.375 0.865,0.354 10 false - LED off 4.302,0.385 5.865,0.656 1.563,0.271 10 false Normal warming mode 2.208,0.594 4.031,0.969 1.823,0.375 10 false Press steering heater switch 2.25,1.521 3.365,1.781 1.115,0.26 10 false After 30 minutes 3.25,1.865 4.771,2.146 1.521,0.281 10 false Thermistor malfunction 2.542,2.146 4.771,2.667 2.229,0.521 10 false Press steering heater switch continuously for 10 seconds or more 5.354,1.844 7.125,2.115 1.771,0.271 10 false Thermistor returns to normal 5.354,2.115 6.729,2.802 1.375,0.688 10 false Steering heater switch returns to normal 1.885,3.688 2.969,3.958 1.083,0.271 10 false After 30 minutes 4.438,0.656 5.646,0.917 1.208,0.26 10 false - Heater on or off 4.521,0.917 6.354,1.198 1.833,0.281 10 false (depending on temperature) 4.438,1.198 5.833,1.51 1.396,0.313 10 false - LED illuminated 4.25,2.917 6.115,3.188 1.865,0.271 10 false Malfunction display mode 4.385,3.188 5.354,3.469 0.969,0.281 10 false - Heater off 4.385,3.469 5.583,3.781 1.198,0.313 10 false - LED blinking 2.24,1.229 4.073,1.542 1.833,0.313 10 false Press steering heater switch 1.885,3.375 3.719,3.688 1.833,0.313 10 false Press steering heater switch

i.

When the engine switch is on (IG), pressing the steering heater switch illuminates the LED and causes current to be output from the steering controller to the heater of the heated steering wheel. Pressing the steering heater switch again turns off the LED and stops the current from being output.


ii.

A thermostat is installed in the steering wheel as a safety mechanism.


iii.

The steering heater switch LED will turn off when either of the following occurs: 1) an open or short in the steering wheel thermistor continues for 2 seconds or more; or 2) the steering heater switch is pressed continuously for 10 seconds or more.


iv.

If the system returns to normal for 2 seconds or more, the previous operation before the malfunction occurred continues. However, regardless of if a malfunction is detected and the malfunction operation is occurring, or if the system returns to normal, the timer will turn off the heater 30 minutes after the switch was first turned on.



b.

Signal input/output description

C147023E02
0.373,0.49 0.815,0.666 0.442,0.176 10 Power 0.347,1.164 1.827,1.34 1.48,0.176 10 Switch Operation Input 0.29,2.67 1.947,2.846 1.657,0.176 10 Temperature Setting Input 0.398,1.922 1.449,2.098 1.05,0.176 10 Thermistor Input 1.917,0.498 2.77,0.674 0.853,0.176 10 Latch Circuit 4.684,0.72 5.465,0.896 0.782,0.176 10 LED Output 4.606,1.391 5.53,1.549 0.924,0.157 10 Heater Output 6.29,1.391 6.625,1.549 0.335,0.157 10 FET 6.202,2.306 6.696,2.463 0.494,0.157 10 Heater 3.233,3.13 4.203,3.306 0.97,0.176 10 Microcomputer

Signal Signal Name Function Signal Type
Input Thermistor input Input of voltage corresponding to heater temperature Analog input
Input Temperature setting input Input of voltage corresponding to temperature setting Analog input
Input Switch operation input Input of power circuit's latch operation estimate signal LOW/HI input
Output LED output Output to LED LOW/HI output
Output Heater output Output to heater LOW/HI output
Output Latch output Power circuit maintenance LOW/HI output


c.

Safety function

Content Operation
When thermistor trouble is detected Heater turns off
When overheating (175°C (347°F)) of controller is detected Heater turns off
When load short current (50 A or more) is detected Heater turns off
When undervoltage (4.5 V) is detected Heater turns off
OFF timer (30 min.) After preset time of timer passes, heater off
Reverse voltage protection Protection circuit operates