Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260967 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted  


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller's voice can be heard properly.

OK:

Voice can be heard properly.


HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.




OK

2.CHECK AUDIO AND VISUAL SYSTEM

NG

REPAIR OR REPLACE CELLULAR PHONE

2.CHECK AUDIO AND VISUAL SYSTEM
a.

Check that sound from the audio and visual system can be heard from a front speaker.

OK:

Sound can be heard from the audio and visual system.




OK

3.CHECK AUDIO SETTINGS

NG

3.CHECK AUDIO SETTINGS
a.

Check that the received voice level is not set to low.

OK:

The received voice level is not set to low.




OK

NG

SET VOLUME TO HIGH