This is power source circuit of the television display assembly.
Inspect the fuses and relays for circuits related to this system before performing the following inspection procedure.
Disconnect the television display assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| W14-17 (GND) - Body ground | Always | Below 1 Ω |
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| W14-1 (+B) - Body ground | Always | 11 to 14 V |
| W14-2 (ACC) - Body ground | Ignition switch ACC | 11 to 14 V |
| *a | Front view of wire harness connector
(to Television Display Assembly) |
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE)
NG