Home › Audio / Visual / Telematics › AUDIO / VIDEO › TELEVISION DISPLAY › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260976 TELEVISION DISPLAY A

AUDIO / VIDEO  TELEVISION DISPLAY  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86295 3.REMOVE TELEVISION BASE

a.
B358768

Detach the 7 claws and 4 clips and remove the television base.


Hide 86680A 4.REMOVE TELEVISION DISPLAY ASSEMBLY

a.
B358769

Disconnect the connector.


b.

Remove the 4 bolts.


c.
B358770

Detach the 2 clips and move the television display assembly as shown in the illustration to detach the 2 guides and remove it.