81260A
1.REMOVE MAP LIGHT ASSEMBLY
89732
2.REMOVE THEFT WARNING RADAR SENSOR
Remove all the tape and the 2 screws.
Detach the clamp and disconnect the central part of the theft warning radar sensor.
The theft warning radar sensor cannot be completely removed.
Disconnect the connector.
86730A
3.REMOVE TELEPHONE MICROPHONE ASSEMBLY
Using a thin-bladed screwdriver, disconnect the connector.
Tape the screwdriver tip before use.
Remove the 7 screws and cover.
Remove the circuit board.
Remove the bezel.
Using a thin-bladed screwdriver, detach the 2 claws and remove the microphone.
Tape the screwdriver tip before use.
| *1 | Protective tape |