86160T
1.INSPECT REAR HEADER SPEAKER ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 4 Ω |
If the result is not as specified, replace the rear header speaker assembly.
| *a | Component without harness connected
(Rear Header Speaker Assembly) |
86150
2.INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (WF1+) - 4 (WF1-) | Always | 2 Ω |
If the result is not as specified, replace the No. 1 speaker assembly with box.
| *a | Component without harness connected
(No. 1 Speaker Assembly with Box) |