Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260985 NOISE FILTER G

AUDIO / VIDEO  NOISE FILTER  INSPECTION  


PROCEDURE

Hide 86011A 1.INSPECT RADIO SETTING CONDENSER

a.
B240495

Using a screwdriver, move the cover as shown in the illustration.

HINT:

Tape the screwdriver tip before use.



b.
B240494E02
2.469,0.896 2.469,0.448 true 1.354,0.917 1.354,0.406 true 1.302,0.229 1.417,0.385 0.115,0.156 10 false A 2.406,0.25 2.552,0.396 0.146,0.146 10 false C 0.083,0.083 0.292,0.25 0.208,0.167 12 false *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Radio Setting Condenser)

Standard Resistance:
Tester Connection Condition Specified Condition
A - C Always 10 kΩ or higher


If the result is not as specified, replace the radio setting condenser.


c.
B240496

Move the cover as shown in the illustration.