Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260985 NOISE FILTER A

AUDIO / VIDEO  NOISE FILTER  REMOVAL  


PROCEDURE

Hide 67939B 1.REMOVE BACK DOOR CENTER GARNISH

Hide 67938A 2.REMOVE BACK DOOR SIDE GARNISH LH

Hide 67937B 3.REMOVE BACK DOOR SIDE GARNISH RH

Hide 67761A 4.REMOVE BACK DOOR TRIM COVER

Hide 75202B 5.REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY

Hide 64798 7.REMOVE BACK DOOR LOCK COVER (w/o Back Door Tire Carrier)

Hide 69783B 8.REMOVE BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)

Hide 64780A 9.REMOVE BACK DOOR TRIM PANEL ASSEMBLY

Hide 86011R 10.REMOVE RADIO SETTING CONDENSER

NOTICE:

If it is necessary to replace the radio setting condenser or terminal cover, both parts must be replaced as they are supplied as a set.


a.
B240498E01
2.19,0.359 2.367,0.511 0.177,0.152 10 *1 1.821,0.994 1.821,0.436 1.821,0.436 2.179,0.436 false

Using a screwdriver, detach the 8 claws and remove the terminal cover with wire harness from the condenser.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


b.
B240499

Remove the bolt.


c.

Detach the clamp from the vehicle body and remove the condenser.