Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260985 NOISE FILTER G

AUDIO / VIDEO  NOISE FILTER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 86011A 1.INSPECT RADIO SETTING CONDENSER

a.

With the radio setting condenser installed, check that there is no looseness or other abnormalities.


b.
E386542C01
1.594,0.417 2.073,0.333 false 2.125,0.26 2.281,0.458 0.156,0.198 10 false 1 0.073,0.063 0.385,0.219 0.313,0.156 10 false *a
*a Radio Setting Condenser


Measure the resistance of the radio setting condenser according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Body ground
·

Engine switch off

·

High mounted stop light off

·

Luggage compartment room light off

·

Window defogger off


Below 1 Ω



c.

Remove the bolt.


d.

Disengage the clamp and disconnect the radio setting condenser with wire harness from the vehicle body.


e.
E211797C03
2.406,1.729 1.927,1.729 false 1.917,0.917 2.448,1.177 false 1.927,0.76 2.406,0.542 false 2.479,1.115 2.573,1.26 0.094,0.146 10 2 2.406,1.646 2.5,1.802 0.094,0.156 10 3 2.427,0.438 2.521,0.583 0.094,0.146 10 1 0.063,0.042 0.375,0.198 0.313,0.156 10 *a
*a Radio Setting Condenser


Measure the resistance and voltage of the radio setting condenser according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2
·

Engine switch off

·

High mounted stop light off

·

Luggage compartment room light off

·

Window defogger off


10 kΩ or higher
1 - 3 10 kΩ or higher


Standard Voltage:
Tester Connection Condition Specified Condition
2 - Body ground
·

Engine switch on(IG)

·

High mounted stop light off

·

Luggage compartment room light off

·

Window defogger off


Below 1 V
3 - Body ground Below 1 V
2 - Body ground
·

Engine switch on(IG)

·

High mounted stop light on

·

Luggage compartment room light on

·

Window defogger on


11 to 14 V
3 - Body ground 11 to 14 V