Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type) › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260991 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  Cursor or Map Rotates when Vehicle Stopped  


PROCEDURE

1.CHECK CONDITION
a.
E106418

Check with the customer if the vehicle has been turned by a turntable.

OK:

Vehicle has not been turned by a turntable.


HINT:

If the vehicle is turned on a turntable with the engine switch turned on (ACC or IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back on (ACC or IG) again with the vehicle completely stopped.




OK

NG

TURN ENGINE SWITCH ON (ACC OR IG) WHEN VEHICLE IS COMPLETELY STOPPED