Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type) › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260991 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier  


DESCRIPTION

The navigation receiver assembly sends a sound signal to the stereo component amplifier assembly via this circuit.

The sound signal that has been sent is amplified by the stereo component amplifier assembly, and then is sent to the speakers.

WIRING DIAGRAM

E286236E09
1.198,1.396 1.375,1.552 0.177,0.156 10 false L+ 1.198,0.906 1.375,1.063 0.177,0.156 10 false L- 1.198,1.865 1.406,2.021 0.208,0.156 10 false R- 1.188,2.333 1.406,2.5 0.219,0.167 10 false R+ 1.063,0.448 1.354,0.604 0.292,0.156 10 false SLD 1.469,0.344 1.656,0.51 0.188,0.167 10 false 6 1.469,1.26 1.656,1.427 0.188,0.167 10 false 3 1.469,0.844 1.656,1.01 0.188,0.167 10 false 2 1.469,1.75 1.656,1.917 0.188,0.167 10 false 4 1.469,2.229 1.656,2.396 0.188,0.167 10 false 5 5.865,0.813 5.979,0.979 0.115,0.167 10 false 6 5.865,1.292 5.969,1.458 0.104,0.167 10 false 2 5.865,2.24 5.969,2.406 0.104,0.167 10 false 1 5.865,1.75 5.979,1.917 0.115,0.167 10 false 5 6.063,0.927 6.396,1.083 0.333,0.156 10 false FL- 6.063,1.406 6.396,1.563 0.333,0.156 10 false FL+ 6.063,1.906 6.396,2.063 0.333,0.156 10 false FR- 6.063,2.385 6.396,2.542 0.333,0.156 10 false FR+ 5.75,2.76 7.094,3.125 1.344,0.365 10 false H54 5.75,2.927 6.969,3.292 1.219,0.365 10 false Navigation Receiver Assembly 0.229,2.677 0.76,2.844 0.531,0.167 10 false H63 0.24,2.823 1.438,3.188 1.198,0.365 10 false Stereo Component Amplifier Assembly 3.74,2.635 4.552,2.885 0.813,0.25 10 false * 0.135,3.417 2.448,3.667 2.313,0.25 10 false *: Shielded

CAUTION / NOTICE / HINT

HINT:

When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER ASSEMBLY)
a.

Disconnect the H54 navigation receiver assembly connector.


b.

Disconnect the H63 stereo component amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H54-6 (FL-) - H63-2 (L-) Always Below 1 Ω
H54-2 (FL+) - H63-3 (L+) Always Below 1 Ω
H54-5 (FR-) - H63-4 (R-) Always Below 1 Ω
H54-1 (FR+) - H63-5 (R+) Always Below 1 Ω
H54-6 (FL-) - Body ground Always 10 kΩ or higher
H54-2 (FL+) - Body ground Always 10 kΩ or higher
H54-5 (FR-) - Body ground Always 10 kΩ or higher
H54-1 (FR+) - Body ground Always 10 kΩ or higher
H63-6 (SLD) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR