Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260991 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the navigation receiver assembly via this circuit.

WIRING DIAGRAM

E281004E25
2.073,0.615 2.229,0.813 0.156,0.198 10 false 2 2.073,1.198 2.229,1.396 0.156,0.198 10 false 3 4.958,0.625 5.115,0.823 0.156,0.198 10 false 2 4.969,1.167 5.125,1.365 0.156,0.198 10 false 3 5.167,1.833 5.719,2.042 0.552,0.208 10 false H58 5.177,2.01 6.427,2.385 1.25,0.375 10 false Navigation Receiver Assembly 0.969,1.813 1.521,2.021 0.552,0.208 10 false H68 0.979,2 2.156,2.385 1.177,0.385 10 false No. 1 Stereo Jack Adapter Assembly 1.604,0.781 2.156,0.99 0.552,0.208 10 false US1- 1.604,1.313 2.156,1.521 0.552,0.208 10 false US1+ 5.198,1.344 5.75,1.552 0.552,0.208 10 false US1+ 5.198,0.781 5.75,0.99 0.552,0.208 10 false US1-

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the H58 navigation receiver assembly connector.


b.

Disconnect the H68 No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H58-2 (US1-) - H68-2 (US1-) Always Below 1 Ω
H58-3 (US1+) - H68-3 (US1+) Always Below 1 Ω
H58-2 (US1-) - Body ground Always 10 kΩ or higher
H58-3 (US1+) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR