Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260991 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  Display Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the display signal from an external device to the navigation receiver assembly via this circuit.

WIRING DIAGRAM

E286235E06
0.958,0.573 1.354,0.771 0.396,0.198 10 false VV+ 0.99,1.375 1.302,1.563 0.313,0.188 10 false VV- 5.917,0.573 6.313,0.771 0.396,0.198 10 false VV+ 5.948,1.375 6.26,1.563 0.313,0.188 10 false VV- 4.479,2.323 5.177,2.531 0.698,0.208 10 false * 2.583,2.323 3.281,2.531 0.698,0.208 10 false * 0.271,3.417 2.417,3.625 2.146,0.208 10 false *: Shielded 5.948,2.177 6.26,2.365 0.313,0.188 10 false SG 5.667,0.49 5.865,0.677 0.198,0.188 10 false 13 5.677,1.271 5.865,1.458 0.188,0.188 10 false 14 1.365,0.458 1.521,0.646 0.156,0.188 10 false 6 1.333,1.271 1.521,1.458 0.188,0.188 10 false 11 5.656,2.073 5.865,2.26 0.208,0.188 10 false 12 0.198,2.563 0.51,2.719 0.313,0.156 10 false H68 5.75,2.625 6.167,2.781 0.417,0.156 10 false H56 0.198,2.708 1.365,3.094 1.167,0.385 10 false No. 1 Stereo Jack Adapter Assembly 5.729,2.781 7.021,3.125 1.292,0.344 10 false Navigation Receiver Assembly

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the H56 navigation receiver assembly connector.


b.

Disconnect the H68 No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H56-13 (VV+) - H68-6 (VV+) Always Below 1 Ω
H56-14 (VV-) - H68-11 (VV-) Always Below 1 Ω
H56-13 (VV+) - Body ground Always 10 kΩ or higher
H56-14 (VV-) - Body ground Always 10 kΩ or higher
H56-12 (SG) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR