This circuit is used when the voice guidance in the navigation system is on or an incoming cellular phone voice in the "Bluetooth" hands-free system is heard.
Using this circuit, the radio and display receiver assembly sends the signals to the stereo component amplifier assembly.
Disconnect the H48 radio and display receiver assembly connector.
Disconnect the H63 stereo component amplifier connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H63-15 (II1+) - H48-2 (RL+) | Always | Below 1 Ω |
| H63-14 (II1-) - H48-6 (RL-) | Always | Below 1 Ω |
| H63-15 (II1+) - Body ground | Always | 10 kΩ or higher |
| H63-14 (II1-) - Body ground | Always | 10 kΩ or higher |
| H63-18 (SLD1) - Body ground | Always | 10 kΩ or higher |
OK
NG