Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type) › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260992 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  Portable Player cannot be Connected Manually/Automatically  


CAUTION / NOTICE / HINT

HINT:

Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the navigation ECU, even if the portable audio player itself can play files. (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for Radio and Display Type)>SYSTEM DESCRIPTION).


PROCEDURE

1.CHECK CONNECTED DEVICE SETTINGS
a.

Check if the portable player is registered as a connected device.

NOTICE:

If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.


HINT:

Only 4 portable players can be registered.


Result
Result Proceed to
The portable player is registered as a connected device. A
The portable player is not registered as a connected device. B



A

2.CHECK SYMPTOMS

B

REGISTER PORTABLE PLAYER AS CONNECTED DEVICE

2.CHECK SYMPTOMS
a.

Check the connection condition between the portable player and navigation ECU.

HINT:
The portable player cannot be connected under any of the following conditions:
·

The portable player is connected to another device.

·

The portable player is connected to the radio and display receiver assembly using the hands-free function.

·

The navigation ECU has cleared the portable player registration.

·

The portable player is off.



Result
Result Proceed to
The portable player cannot be connected automatically. A
The portable player cannot be connected manually. B



A

3.CHECK AUTOMATIC CONNECTION SETTINGS

B

4.CHECK PORTABLE PLAYER STATUS
3.CHECK AUTOMATIC CONNECTION SETTINGS
a.

Check the automatic connection settings of the "Bluetooth" audio.

i.

Check that the "Bluetooth" connection is on.

OK:

"Bluetooth" connection is on.





OK

4.CHECK PORTABLE PLAYER STATUS

NG

CHANGE "Bluetooth" POWER TO "On"

4.CHECK PORTABLE PLAYER STATUS
a.

Check the status of the portable player.

i.

Check that the portable player is not in standby mode.


ii.

Check that the portable player is not connected to another device (headphones etc.).

OK:

The portable player is not in standby mode and not connected to another device (headphones etc.).





OK

5.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

NG

TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)

5.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
a.

Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

OK:

The portable player can be connected manually/automatically.




OK

6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

NG

PORTABLE PLAYER IS NOT COMPATIBLE

6.REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES
a.

Remove additional devices which use radio waves.


b.

Check if the portable player can be connected manually/automatically.

OK:

The portable player can be connected manually/automatically.




OK

END

NG