Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260992 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  Display Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the display signal from an external device to the radio and display receiver assembly via this circuit.

WIRING DIAGRAM

E286235E04
0.957,0.577 1.349,0.775 0.392,0.198 10 VV+ 0.992,1.376 1.301,1.560 0.309,0.184 10 VV- 5.917,0.577 6.309,0.775 0.392,0.198 10 VV+ 5.952,1.376 6.261,1.560 0.309,0.184 10 VV- 4.474,2.322 5.172,2.526 0.698,0.205 10 * 2.583,2.322 3.280,2.526 0.698,0.205 10 * 0.271,3.415 2.420,3.619 2.149,0.205 10 *: Shielded 5.952,2.182 6.261,2.365 0.309,0.184 10 SG 5.665,0.486 5.862,0.670 0.198,0.184 10 13 5.679,1.271 5.863,1.455 0.184,0.184 10 14 1.364,0.458 1.520,0.642 0.156,0.184 10 6 1.336,1.271 1.519,1.455 0.184,0.184 10 11 5.658,2.07 5.862,2.253 0.205,0.184 10 12 0.194,2.567 0.502,2.723 0.309,0.156 10 H68 5.749,2.623 6.169,2.779 0.420,0.156 10 H51 0.194,2.707 1.454,3.064 1.260,0.357 10 No. 1 Stereo Jack Adapter Assembly 5.728,2.777 7.016,3.120 1.288,0.343 10 Radio and Display Receiver Assembly

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the H51 radio and display receiver assembly connector.


b.

Disconnect the H68 No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H51-13 (VV+) - H68-6 (VV+) Always Below 1 Ω
H51-14 (VV-) - H68-11 (VV-) Always Below 1 Ω
H51-13 (VV+) - Body ground Always 10 kΩ or higher
H51-14 (VV-) - Body ground Always 10 kΩ or higher
H51-12 (SG) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR