Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/o Multi-display) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261004 TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/o Multi-display) J

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/o Multi-display)  Clearance Warning Buzzer Circuit  


DESCRIPTION

The clearance warning buzzer sounds to alert the driver. The sounding pattern changes according to the distance to the obstacle.

WIRING DIAGRAM

E194317E07
5.698,2.76 6.094,2.938 0.396,0.177 10 false I1 5.698,2.927 6.948,3.271 1.25,0.344 10 false Clearance Warning ECU 2.542,2.729 2.938,2.906 0.396,0.177 10 false G161 2.51,2.229 3.031,2.438 0.521,0.208 10 false Z- 3.896,2.24 4.104,2.448 0.208,0.208 10 false Z+ 5.906,2.104 6.292,2.313 0.385,0.208 10 false BBZ 5.917,1.031 6.302,1.24 0.385,0.208 10 false EF 5.656,2 5.896,2.208 0.24,0.208 10 false 14 4.156,2.031 4.396,2.24 0.24,0.208 10 false 1 2.292,2.01 2.531,2.219 0.24,0.208 10 false 2 5.646,0.927 5.885,1.135 0.24,0.208 10 false 12 2.531,2.906 4.104,3.302 1.573,0.396 10 false No. 1 Clearance Warning Buzzer

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NO. 1 CLEARANCE WARNING BUZZER - CLEARANCE WARNING ECU)
a.

Disconnect the I1 clearance warning ECU connector.


b.

Disconnect the G161 No. 1 clearance warning buzzer connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I1-14 (BBZ) - G161-1 (Z+) Always Below 1 Ω
I1-12 (EF) - G161-2 (Z-) Always Below 1 Ω
I1-14 (BBZ) - Body ground Always 10 kΩ or higher
I1-12 (EF) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR